Industrial45M3/hr 98% C2H2 Acetylene Plant With ISO9001 / 2008
3.1 C2H2 generator:
Carbine is open to drop into water. The generator is of low
pressure, wet type . It consists of hopper, shell of generator,
distributor, washing cooler and slug discharge mechanism, etc. This
generator is of simple structure, carbide requirement is wide and
there no need of crusher and dust remover. So as to reduce the
investment. Generator washing equipment is combined with water
sealer as one which is fit for safe operation. During feed of raw
material there is no need of nitrogen to replace so that the
acetylene is pure.
Requirement for the generator:working tempt.≤80℃,working
pressure≤7.0Kpa,V=5m3,size of the carbide:∮10-200mm.
3.2 Gas holder:
It is of water tank structure(wet type) which consists of water
tank, bell, mask and rail. The volume is V=10 m3. Tempt. is
ambient. Working tempt. is 5.0Kpa. It is used for equalizing of the
pressure between generator and compressor inlet pressure.
3.3 C2H2 purifier:
It is of sulfuric acid wet technology which consists of
purification equipment shell, inlet pipe, gas distributor and
sleeve cooler.V=0.52 m3, working tempt. 40℃,working pressure 0.05Mpa.
3.4 Low pressure drier:
It adopts dry technology which consists of shell, inlet pipe and
sieve plates. Calcium chloride with no content of water is used for
dry agent to absorb the moisture in C2H2. V=0.m3,working tempt.
40℃,working pressure 0.05Mpa.
3.5 Reciprocating C2H2 compressor:
After-purified C2H2 is compressed to 2.5Mpa by C2H2 compressor. Io
meet requirement for filling, the machine is of anti-explosion type
with HP and LP interlock to guarantee the safety of operation. The
compressor is of compact structure with small size of 3-stage
,Z-type, working pressure:2.5Mpa,discharge capacity 0~48m3/h.
3. 6. Diaphragm compressor
M2V-20/1-25 C2H2 diaphragm compressor is used for compression of
C2H2 to 2.5Mpa. It consists of crank shaft box, crank shaft, main
and auxiliary connecting rods and 1st and 2nd stage cylinder in V
series. Each cylinder has cylinder cover, oil disk and cylinder
body. Under control of the valve, each vibration of diaphragm to
finish each inlet and discharge process. Diaphragm separates
cylinder and oil cylinder completely so that gas only contacts
metal diaphragm so that there is no pollution of oil to guarantee
the quality of the medium. Cylinder consists of cylinder cover
surface and diaphragm disk as a complete sealed chamber so that the
tightness is very nice. The structure is very compact with small
size. 2stage ,V-type shape,working pressure:2.5Mpa,discharge
3.7 Filling ramp is of one valve one cylinder which is easy for
operation. Upper side there is spraying water to cool to reduce the
tempt. of cylinder. There are 108cylinder positions. Working
pressure:2.5Mpa,working tempt:ambient tempt.
We Hang Zhou TAI LIAN Co., Ltd. is a gas plant and machinery
supplier which is special faced to Bangladesh market.
Our supply scope has: air separation plant (gas oxygen plant,
liquid oxygen plant, nitrogen plant), acetylene plant, hydrogen
plant, CNG station plant, etc.
Also we are exporting gas plant related items: air compressor,
oxygen compressor, liquid oxygen pump, oxygen/nirtogen/argon
cylinders, cylinder valves, regulators, cylinder testing machines.
We have more than 10 companies corporated in Bangladesh..